MG1000DB

All aspects of MG1000DB High-Speed Paper Cup Making Machine are designed to seek performance.
Ideal For Single Lope Coated Paper Cup, Mdmooda Machine Is An Automatic Environmental Machine With Multi-running Positions. This Machine Runs A Whole Procedure Of Paper Feeding. Cup-blank Wall Sealing. Oiling. Bottom-punching (Knurling), Heating, Rolling. Rinnmimg. Rounding (Curling), And Tripping. This Machine Is Used For Producing A Variety Of Cups Depending Upon The Desired Dimensions Of The Cup Such As Volume (M0 Depth. Top Diameter, Bottom Diameter Height And Depth Of The Bottom.
An Uniquely Designed Frame Structure Ensures Mss Vibration & Less Noise At Higher Speed
All The Cams Are Hardend To Minimize The Wear And Tear In Long Run
Advance Sensor-based Technology Automatically Cut Off The System When The Machine Is Not In Operation Which Reduce Paper Wastage.
Automatic Cup-blank Feeding And Sealing.
Automatic Cup-bottom Feeding, Punching, Folding And Knurling.
Automatic Cup-top Edge Curling And Cup Counting.
Step-less Speed Management.
Cup-blank And Cup-bottom Sealing Is Done By Auto Cut-off Feature Based Advance Heaters.
Very Easy In Operation (One Operator Is Sufficient).
Easy Exchangabm Mould Prooduce Different Size Paper Cups.
Direct Bottom Feeding Mechanism. And Do Mired Airmfficressur.
A Well Engineerd ‘barrel Cam Mechanism” Ensures Precise Movement And Functioning Of Tam Tables.
Machine Is Designed With 1 Turning Plate.
Cup Volume: 32m1 To 330m1 (With Various System)
Production Capacity: Ao- Ian Cups Per Minute.
Technical Specifications
Parameters
MG1000DB
Paper Cup Size
32 Ml To 330 Ml (Mould Can Ee Change)
Raw Material
Single Side Per Film Coated Paper
Suitable Paper Weight
150-280 Gsm
Production Speed (Per Minute Average)
90-100 Cups
Production Speed Setting
VFD Remote
Sealing Technology
Heater / Ultra Sonic
Top Curling Lubrication
Paraffin Oil.
Safe Working Area From All Sides
1000 Mm
Cup Counting System
Automatic
Cup Strand Counting
Automatic
Fault Detection
Manual with Alarm*
Fault Detection
Manual with Alarm*
Machine Dimensions
2550-1320-1000 Mm
VFD
1
Indexing Mechanism
Barrel Cam
Power Supply Required
3- Phase. 50 Hz
Electricity Consumption per Hour (Approximately)
4-6 Units
Total Machine Electric Load
6 Kw
Main Motor Power
2 HP / 1.50 kW
Knurling Motor Power
0.75 HP / 0.55 kW
Lubrication Motor Power
.25hp/.05kw
Relay
16
Machine Weight
2300 Kg
Machine Dimensions
2550-1320-1000 mm
Note: The above mentioned specifications are subject to change without any prior notice.